You may use your iPad Pro for a number of different reasons. However, overtime your screen might face some wear and tear and show signs hinting a replacement.
When you feel something on your iPad screen isn’t right, you would definitely need to get it repaired sooner. Here’s some signs to look for:
Small Cracks on iPad Pro
When it comes to such minor small cracks, you wouldn’t even notice that your iPad Pro have a few of these. This is possible if they’re present in the corner or an area on your screen that’s not usually visible. In such scenarios, a replacement wouldn’t be necessary as you would seldom notice any interferences during usage. However, you should definitely use a screen protector. Also, always see if those little cracks don’t spread. If they do, taking it to a professional would be the best way to solve the problem.
If your iPad is somewhat new, it’s a good idea to look at your warranty. You may find in the fine print that you’re able to trade your iPad in for a new one. This process is straightforward if you’ve paid for AppleCare.
Spreading Cracks on iPad Pro
Compared to those seldom visible, these are often terrible to view at first glance. However, a replacement isn’t necessary if the screen responsiveness is fine and you’re able to view the content on the screen. In any which case, you should definitely keep an eye on these as they can potentially spread and worsen your problem later.
There’s no need to rush in for an iPad screen repair right away, though. Such repairs are expensive, to the point that a trade-in may make more sense. They’re not going to charge you less money to fix a new crack than they’ll charge you to fix a completely damaged screen. You may be able to get several more months out of your device, which is enough time to set some money aside for the repair.
Side-to-Side Cracks on iPad Pro
Such cracks are rather problematic and needs urgent resolution. Side-to-side cracks are comparatively deeper and prolonged usage on your iPad can easily worsen your experience. Planning a time for repair is recommended for side-to-side cracks on your iPad Pro.
Long, Colour-Distorting Cracks on iPad Pro
Such cracks are those cause serious problems with usability and may immensely hinder the performance of your iPad. These types of cracks will appear as a spider web on your screen and bring in all sorts of problems, block the visibility, and distort your display. If you notice any such cracks, make sure you get your iPad repaired as early as possible.
Multiple Cracks on iPad Pro
The worst situation is when your screen has multiple cracks at the same time. These cracks will continue to spread and will eventually interfere with your screen’s performance. If you don’t get an iPad mini screen repair, your screen may no longer recognize your touch, or it could even think that your finger is somewhere other than where it is. Unfortunately, such screens are beyond repair and must be replaced.
Repairing any iPad is not anybody’s cup of tea, and when it comes to repairing or replacing the iPad Pro 12.9 Glass & LCD, things are no different. If you are not an expert, it is advisable not to go for any DIY stuff, to straighten up things you can very well inflict further damage to the gadget. Hence, in case of any eventuality, it is advisable that you turn to an authorised repair service provider, who is experienced and expert enough to fix the problem.
You will find several companies that carry out iPad Pro Repair in Wellington. Not all of them are equally competent and experienced.
At One Stop Repairs, we have experienced technicians who have performed 1000s of repair jobs. Repairing iPad Pro Screens is a very tricky and delicate process. All our repairs also come with 6-month warranty, and we also provide price match offer from any other repairer in Wellington.
Replacing and Repairing iPad Pro 12.9 Glass and LCD
To start with, the entire process is a cumbersome and tricky affair, and it needs immaculate precision.
However, if by any chance you are vying to try things yourself, you must follow the steps mentioned below:
Heating the Opener
We recommend that you use your microwave oven (!). Clean the oven properly and then place the iOpener at the centre of its base. Heat the iOpener for about 30 seconds or so. All throughout the repair procedure, as the iOpener keeps on cooling, heat it once again, for another 30 seconds.
Now remove the iOpener from the microwave carefully so that you do not touch the hot centre.
Taking Care of the Screen Glass And LCD
If the screen and the LCD of your gadget, i.e. the display assembly is cracked or is damaged, try not to tap it. You will damage it further. You need to lay overlying strips of those clear packing tapes over the display until the entire face is covered. This will stop the shards of glass from falling off. It will also help to maintain the structural integrity of the device as you pry and lift the display.
Removing the Display
Removal of the display assembly to repair iPad Pro Glass & LCD involves using an opening pick or a halberd spudger. This will help you to separate the adhesive by securing the display.
When it comes to removing the display, you need to be utterly careful, even when it comes to using the iOpener. You need to use the device perfectly, more so when you use a suction handle, to pull apart the damaged screen. Be sure that you do not damage the inner parts of the device as it will further complicate things and spread damage from the display assembly to the internal parts.
Once done, it’s time to replace the display. That is another story, though. So you see, mere getting rid of the damages screen is a cumbersome process, and hence need to be left done by an expert. Hence, we would recommend that you get in touch with us to have the display assembly of your iPad Pro 12.9 repaired or replaced.
If you’re unable to repair or have any issues, we at one stop repairs can help resolve the iPad Pro Screen Repair Issues in Wellington.